DESIGN AND CONSTRUCTION OF A YOUNG COCONUT PEELING MACHINE WITH A CAPACITY OF 60 FRUITS/HOUR FOR MICRO-ENTERPRISES
DOI:
https://doi.org/10.65244/jggengineering.v1i1.13Keywords:
Electric Motor, Coconut Shell Motor Power young, Micro EnterprisesAbstract
This study aims to analyze the Power motor Which needed For peeling skin coconut young ; Basics Which used For make machine peeler skin young coconut ; Calculation components construction machine peeler young coconut skin ; Time Which needed in One time peeling skin coconut young in manual ; Results Which obtained from testing tool help peeler or cutter coconut skin young. From the results of the discussion in designing the construction of a young coconut peeling machine with a capacity of 60 pieces / hour with acceptable results according to the plan. After the discussion is carried out in accordance with what is desired based on the objectives of this planning, namely: determining the motor power needed to drive the young coconut peeling machine; determining the material and size of the machine elements used; showing the work of the machine and making a working drawing of the coconut peeling machine. The results can be concluded as follows: The electric motor used = 1 hp , Belt length on the pulley = 61 inches , Motor pulley diameter = 3 inches , Pulley diameter on the coconut drive = 12 inches , Bearing = 6205 , Analysis of the cost of making the machine used Rp: 5,602,000 .
Downloads
References
Awang, l., salleh, zyusop, MYM, Roslee, AA, Sapun Sm, and Ishk, MR, 2012. "Mechanical Properties and microstructure of op cocos Nucifer(coconut) Coir Fiber, Conference Proceedings
Indahyani, T., 2011. Utilization of Coconut Fiber Waste in Interior and Furniture Planning that Impacts the Empowerment of Poor Communities” HUMANIORA Vol. 2 No. 1 April 2011: 15-23
Joseph E. Shigley, Larry D. Mitchell, Gandhi Harahap M. Eng, 1984. Mechanical Engineering Planning, Fourth Edition, Volume II. Jakarta: Erlangga
Napal GR,2000. Metal Forming Processes. New Delhi: Khanna Publishers,
Rinto Supardi Sipingka, 2018. Analysis of the Performance of the Blade of a Young Coconut Skin Slicing Machine. Medan: Medan Area University.
Stefanus Tri Rezki Perkasa., Adi Hartono., Langgeng Wijaya.. 2019. Design and Construction
Sularso & Kiyokatsu, Suga. 1997. Basics of Machine Design and Selection of Machine Elements. Jakarta: PT Pradnya Pramita.
Friendly Young Coconut Peeler
Downloads
Published
Issue
Section
License
Copyright (c) 2025 JURNAL TEKNIK LPPN
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Journal of Golden Generation Engineering agree to the following terms:
- Authors retain copyright and grant the Journal of Golden Generation Engineering right of first publication with the work simultaneously This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License. that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
